Pnuematic Slide for Special Purpose Machines (SPM)

Felting Fixtures

Pnuematic Drilling Fixture

• Cast iron Based Bottom and top slide.

• Scraped base with hardened guideways.

• Having the accuracy of 0.015 (Microns ) over 600 mm length.

• The fetling fixture for fetling and shape of casting.

• By using our fixtures filing marks in other (special purpose) areas to be avoided, at the same time productivity will be increased. 

• Pnuematic Clamping fixture for Drilling the components.

• Manufacturing all type of Pnuematic clamping fixture like this.

Number Rolling Fixture for Bi - Metallic Bushes

Variable type Micrometer

Indexing unit with Pnuematic clamping fixture

• Operated by manually by using hand lever.

• Having adjustable punch Holder.

• To check same size of the components in the production unit.

• Hardened and grounded masters with accuracy of 0.002 microns 

• Packed with the thermocal box, so that you can take with you anywere.

• Min 50 mm to max 350 mm you can measure.

• Indexing the components in 4 or 6 places for fetling or other purposes.

• Indexing by pedal operated
  fixing any type of fixtures in the indexing unit.

• Hardened clutch unit with plunger for indexing

Pnuematically Operated leak testing fixtures

Leak Testing  Fixture (Pnuematically operated )

Press Safety Device

• All types of alumimum castings and any other castings to be checked.

• Operated by auto cycle or semi auto cycle as required by customer.

• Leak testing by component dipping method or water pumping method.

• All types of alumimum castings and any other castings to be checked.

• Operated by auto cycle or semi auto cycle as required by customer.

• Leak testing by component dipping method or water pumping method.

• Fully Mechanically operated safety device using in power press.

• It's Maintenance free device.

• This device most probably using in the field of continues production of press components. (like bush, washer and gascuts). and wherever the operator hand moving near the punch every time.

• By using our device it protect the operator hand by unfortunate accident.

Inspection Gauge for Bush outside Diameter Checking Under Load Condition 

Receiver Gauages

• To check the Ouside Diameter of the bush at any load.By Pnuematically 

• Repeatability of the master with split block at load condition is within 0.002 (Microns).

• Using non-viberated pressure gauge for set the pressure.

• Load calibration by using the calibrated load cell.

• Recevier Gauges for Holes Position checking with the accuracy of 0.001 m.m.